SKU: 9013-601-2005 & -2006

Surgical mask Type IIR/3


Version: 1.0





How to Use it?

1. Place the loops over each ear
2. Press the metal nose piece over the nose to form a seal. Cover your mouth and nose with the mask, and make sure there are no gaps between your face and the mask
3. Nose and chin are covered

A reusable face mask will not protect against infection if used improperly and no other measures are taken.

How to clean it?

Our masks contain natural silver, the storage, maintenance and washing ways are very specific:

  • There's no need to wash it every day just take it off and put it in a dry, ventilated area.
  • Only wash the mask when it is visually dirty.
  • To wash, rinse in warm water for a maximum of 5 minutes, gently rub any dirt marks under warm water (maximum 40° C / 104° F)
  • Don't ring the masks during washing.
  • Don't dry clean; don't soak in high-temperature water; don't wash with a machine.
  • Don't iron the masks; don't steam iron the masks.
  • Don't use a dewatering machine or dryer for the drying process. It's better to let it dry gently in the open ventilated air.

Appropriate cleaning and care can extend the life of the masks.


      This mask is not for use:
      • for high risk aerosol-generating procedures.

        Product Information


        Surgical mask type IIR conform Medical device EN 14683:2019+AC:2019

        Medical Device Class I according to Medical Devices Directive 93/42/EEC and Medical Devices Regulation (EU) 2017/745

        Composition: 38 % Polyamide, 3 % Pure Silver, 53 % Polypropylene, 1 % Elastane, 5 % cotton
        Multi-layered: 6 Layers - 4 Nonwoven, 2 wovens (metallized with 99,9 pure silver) includes Fluid Protection
        Weight: 9,5 g
        Dimensions: M: 210mm x 165 mm
        L: 240 mm x 185 mm

        SUPRCARE Ltd - 160 City Road, London EC1V 2NX, United Kingdom - -

        Importer Europe: Datio BV - Groenstraat 59, 2870 Puurs-Sint-Amands, Belgium -


        Side effects

        If you encounter any side effects by wearing our device than please report this as soon as possible by sending us an email with the clear description of your issue.